audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Steering Mounted Controls Assembly:|910828|Page 2611 > < Customer Interest for Steering Mounted Controls Assembly:|910828|Page 2608
Page 1
background image

Steering Mounted Controls Assembly: All Technical Service Bulletins
Electrical - Steering Wheel Controls DTC 0003

91 08 28 

2018209/1 

July 14, 2008

Vehicle Information

Steering wheel electronics (DTC 0003)

Condition

DTC 0003 (control unit defect) is stored in the steering wheel electronics control unit (Address word 16); however, this DTC does not affect the function
of the vehicle and the customer may not complain about a steering wheel control related issue.

Technical Background

The entry in the steering control unit is incorrect.

Production Solution

Modified control units.

Service

1.

Switch on the ignition (terminal 15 active).

2.

Delete the memory (address 16, steering wheel electronics).

3.

Wait 10 - 15 seconds. (Terminal 15 stays active.)

4.

Read the memory.

^

If the memory is empty, the steering wheel electronics can be left in the vehicle. The DTC was stored in error.

^

If the DTC returns, replace the steering wheel electronics.

Warranty

When procedure applies to vehicles under warranty, use the following:

All Technical Service Bulletins for Steering Mounted Controls Assembly:|910828|Page 2611 > < Customer Interest for Steering Mounted Controls Assembly:|910828|Page 2608