A8L V8-4.2L (BFM) (2004)
/Page-4173002.png)
-
Press off the protective cap - 2 - from the voltage regulator - 1 - in the - direction of the arrow -.
-
When installing the voltage regulator, make sure the carbon brushes rest properly on the slip rings.
-
Attach the protective cap with voltage regulator installed.
Install in reverse order of removal, observing the following:
-
Install the generator.
‹› Tightening specifications, refer to => [ Valeo Generator Overview, from 2001 ] See: Valeo Generator Overview, From 2001.
