A8L V8-4.2L (BFM) (2004)
Power Distribution Relay: Service and Repair
Part 1
Battery Switch Off Relay -J655-, Removing And Installing
Note:
-
Vehicle voltage is disconnected in the event of a control element test or accident.
-
Not all Battery Switch-Off Relays -J655- have a reset button. Units without a reset button must be replaced in order to restore function.
-
To establish vehicle voltage (e.g. for towing), press button -1-.
-
Removing
-
Open cover -8-.
-
Unscrew bolt -7-.
-
Unscrew terminal -3-.
-
Unscrew terminal -4-.
-
Unclip connector -6- at retainer tabs -5- (2x).
-
Detach connector -6-.
-
Installing
-
Install Battery Switch-Off Relays -J655- -2- in reverse order to removal.