A8L V8-4.2L (BFM) (2004)
‹› Pay attention to retaining clips - arrows - on installation.
-
Remove rear bolts - 3 - for dome brace.
-
Attach (10 - 222 A) with (10 - 222 A /21) to suspension strut domes.
‹› Supports are marked for left and right side of vehicle.
‹› Center resting point of supports is positioned on front bolts for dome brace.
‹› (10 - 222 A /21) are secured with rear bolts - 3 - for dome brace.
‹› Knurled screw - 1 - must be screwed down such that support plate rests on suspension strut dome.
-
Attach (10 - 222 A /12) to rear engine lifting eyes.