A8L V8-4.2L (BFM) (2004)
-
Lubricate the bushing lightly with assembly paste (G 052 109 A2).
Mounting Installed Location
The opening in the core of the bushing - arrow A - faces in the direction of the center seam - arrow B -.
-
Insert the bushing - 1 - into the guide link - 2 -, observe the installed position when doing this.
-
Install the special tools as shown in the illustration.
‹› When installing, make sure the bushing does not tilt.
-
Press the bushing - 1 - into the guide control arm - 2 -.
-
Note the installed depth marking when installing - arrow -.
-
Check the installed position of the bushing - 1 - in the guide link - 2 -.