A8L V8-4.2L (BFM) (2004)
/Page-5077002.png)
^
Open clamp -1- and detach suction hose -2- from connection piece -3-.
^
Unscrew air line from air supply unit -arrow-.
^
Unscrew nuts-4- and remove air supply unit.
Note: Shown without bumper for ease of illustration.
Installing
Installation is in reverse order. Note the following:
^
The tightening torques of bolts/nuts and information on whether the bolts/nuts must be replaced => (assembly overview: air supply unit).
^
Install front noise insulation.
See: Air Supply Unit, Assembly Overview
^
Install the wheel housing liner.
^
Install and tighten wheel
