A8L V8-4.2L (BFM) (2004)
-
Pull cover slightly upward until cover guides - 1 - are outside of openings - 2 -.
-
Then swivel the rear of the cover towards the top, in the direction of the - arrow -, while simultaneously pulling it over the cross brace of the
center console - 3 -.
-
Lift the vehicle.
-
Remove the crossmember - A - under the exhaust system.
-
Disconnect the front exhaust pipe and catalytic converter from the rear exhaust system and tie it up.
-
Remove the lower shield - B -.
-
Remove the air duct - 1 - from the transmission.