audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Wiring Harness, A/T > < Transmission Oil Pan, ATF Screen and Mechatronics Unit, Removing and Installing|Page 10024
Page 5
background image

  ‹› Ignore - arrows -.

-

Install the oil screen. Refer to => [ Oil Screen ] See: Fluid Pan/Service and Repair/Removal and Replacement/Oil Screen.

-

Install the oil pan. Refer to => [ Oil Pan ] See: Fluid Pan/Service and Repair/Removal and Replacement/Oil Pan.

-

Disconnect the connector on the left side of the transmission and turn it clockwise opposite the - direction of arrow -.

-

Fill the ATF. Refer to => [ ATF, Draining or Filling after Repair ] See: Fluid - A/T/Service and Repair/ATF, Draining or Filling After Repair.

  ‹› If the Mechatronic was replaced:

-

Perform a transmission adaptation. Refer to => [ Transmission Adaptation, MY 06 ] See: Application and ID/09EA Transmission/Transmission
Adaptation, MY 06.

Wiring Harness, A/T > < Transmission Oil Pan, ATF Screen and Mechatronics Unit, Removing and Installing|Page 10024