A8L Quattro Sedan V8-4.2L (AUX) (2001)
CAUTION: Note safety measures when working with airbag.
-
For vehicles with coded radio unit, radio/navigation system (RNS) note coding; ask if necessary.
-
Disconnect battery ground strap and cover negative pole.
-
Remove rear seat bench.
Installed position of connector (orange) - 3 - for side airbag left and right: near C-pillar.
-
Cut cable tie of connector.
-
Insert connector together on both sides and slide foam tube - 1 - over.
-
Install rear seat bench.
-
Switch ignition on.
WARNING: When connecting battery make sure no one is in the vehicle.
-
Connect battery.
-
Remove label for deactivated rear side airbags.
-
Code control module to activate rear side airbags.