A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Accessory Drive: Service and Repair
Power Take-Off Seals, Replacing
Power Take-off Seals, Replacing
Special tools, testers and auxiliary items required
‹› Seal Remover (T40195)
‹› Pressure Piece (T40192)
‹› Pressure Piece (T40193)
Procedure
-
Remove air conditioning compressor.
-
Remove power steering pump.
-
Remove hose clamp at dust cap - arrow -.
-
Remove dust cap together with A/C compressor input shaft from shaft end of A/C compressor drive spur gear.
-
Rotate the spindle on the Seal Puller (T40195) all the way back.
-
Lubricate the seal remover threaded head, position it, and install it in the shaft seal for the A/C compressor drive and power steering pump drive as
far as possible using strong force.