A8L Quattro Sedan W12-6.0L (BSB) (2005)
Dimension - a - = 80 mm
and the
Dimension - b - = 230 mm
Dimensions represent the mounting points. Also see the "old " wire.
-
Secure the wire at - dimension a - at top left spring - arrow 1 -.
-
Form a loop and secure wire at - dimension b - from behind on seat wiring harness - arrow 3 -.
-
Secure wire to backrest plate - arrow 2 -.
-
Pay special attention that the wire from outlet of headrest tube up to mount - arrow 2 - can follow the adjustment movements of the active
headrest without jamming or stressing.
-
Continue routing wire at backrest and seat wiring harness - arrows - up to harness connector of seat wiring harness.