A8L Quattro Sedan W12-6.0L (BSB) (2005)
Voice Activation Module: Service and Repair
Speech Control System
Speech Control System
=> [ Speech Input Control Module, through 29 August 2008 ]
=> [ Speech Input Control Module, from 1 September 2008 ]
Speech Input Control Module, through 29 August 2008
‹› If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine. Use the Vehicle
Diagnosis, Testing and Information System (VAS 5051) to do so.
-
Switch off all electrical consumers.
-
Remove the key.
Removing
-
Remove radio (R). Refer to => [ Radio, Standard and BOSE Sound Systems, through MY 05 ] See: Radio, Stereo, and Compact Disc/Service and
Repair/Radio System.
-
Open cover - 2 - of radio and fold it down - arrow -.
-
Carefully pull speech input control module (J507) - 1 - out of radio in - direction of arrow -.
Installing
-
Install in reverse order of removal.
-
Make sure that harness connector between speech input control module and radio engages correctly in radio.
Perform the following function test:
-
Switch on the radio.
-
Briefly depress PTT button on multi-function steering wheel.
A "Ping" tone sounds, the speech input system is active.
-
Say "Help".
Since the radio is active, the speech dialog system responds with "Commands for the radio are...".
Depending on the equipment, other functions can be selected: