A8L Quattro Sedan W12-6.0L (BSB) (2005)
Front Door Closer: Service and Repair
Closing Assist Motor
Closing Assist Motor
1 - Motor for closing assist
‹› Door trim removed.
‹› Removing:
‹› To remove, unscrew hex union nuts - 1 - from connecting elements - 4 -.
‹› Pull off motor and disengage cable => [ Disengaging and engaging cable ].
‹› Installation:
‹› Before installing, engage release cable in closing assist motor.
‹› Insert washers - 3 - onto connecting elements - 4 -.
‹› Place closing assist motor onto connecting elements and tighten hex nuts 5Nm.
2 - Hex head collar nut
‹› 5Nm
3 - Rubber bushing