A8L Quattro Sedan W12-6.0L (BSB) (2005)
Hood Latch: Service and Repair
Hood Locking Bracket
Hood Locking Bracket
1 - Hood
‹› Height adjustment is performed via the lock bracket.
‹› Screw lock bracket completely into hood.
‹› Unscrew bracket 3 rotations.
‹› Place anti-twist mechanism on and secure it over lock bracket with a Torx(R) bolt.
‹› Check flush alignment and gap dimensions
‹› During the closing test, hood must fall from balance position into hood lock and engage completely.
‹› If necessary, correct adjustment and perform test anew.