A8L Quattro Sedan W12-6.0L (BSB) (2005)
Trailer Hitch: Service and Repair
Trailer Hitch, Removing and Installing
Trailer Hitch, Removing And Installing
Assembly overview
1
-
Hex bolt
-
60 Nm
CAUTION: When installing, bolt must not be driven through plastic bush of balancing element by hammer blows.
-
When installing, screw in bolt through balancing element into threaded bush - 7 - of mounting element - 9 -.
2
-
Washer
3
-
Cross member
-
Before removing, bumper must be removed.
-
Removing power outlet from trailer hitch.
-
Remove hex bolt - 1 - completely from longmember.
-
Unscrew multi - point bolts - 7 - on both sides.
-
Pull crossmember of trailer hitch out of longmembers.
4
-
Ball head
5
-
Holding plate
6
-
Electrical connector coupling - Removal.
-
Removal.
7
-
Multi - point bolts
-
30 Nm
8
-
Tubular rivet
-
2x per side
9
-
Threaded plate
-
Riveted to longmember from below.