A8L Quattro Sedan W12-6.0L (BSB) (2005)
Passenger Assist Handle: Service and Repair
Trim
Roof Grab Handle
Removing
-
Using a screwdriver, pry out covers - 3 - (Qty. 2) from below.
-
Remove bolts - 2 - (Qty. 2).
‹› Tightening torque: 4 Nm.
-
Remove roof grab handle - 1 -.
Installing
‹› Threaded holes for roof grab handle must be cleaned of locking compound residue after removal. Otherwise, new screws could lock up when
installed and shear off when removed again.
‹› They can be cleaned with a thread cutter.
‹› Replace roof grab handle screws (self-locking).