A8L Quattro Sedan W12-6.0L (BSB) (2005)
CAUTION!
Always follow installation sequence for A-pillar trim.
-
Guide upper A-pillar trim - 1 - toward front between door rubber and side plate.
-
Guide trim retainer - 3 - into the proper clip.
-
Clip upper A-pillar trim - 1 - firmly with both clips - 2 - (Qty. 2).
-
Install bolt - 4 -.
CAUTION!
Ensure trim is held securely.
-
Make sure that door rubber is pulled cleanly over upper A-pillar trim.
2 - Clips (Qty. 2)
3 - Retainer
4 - Screw
‹› Tightening torque: 4 Nm
‹› self-locking
‹› replace
‹› Always clean threaded holes for bolts (e.g. using a thread cutter)