A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Install pressure nut - 1 - in brake caliper as far as stop and then loosen pressure nut a quarter turn.
-
Insert protective cap in brake caliper groove. Use Trim Removal Wedge (3409) to do so.
-
Carefully slide brake piston into brake caliper. Move brake piston when doing so. Brake piston must be guided over pressure nut, this is only
possible in four positions.
-
After brake piston has been guided onto pressure nut, press it as far as stop into brake caliper.