A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Remove brake line from flaring tool, clean and check brake line and flared head.
Briefly rinse part of brake line remaining in vehicle.
-
Connect brake charger/bleeder unit (VAS 5234), place bleeder container hose on flanged head of brake line and run (VAS 5234) briefly until
some brake fluid runs through.
-
Clean the brake line with compressed air.
-
Join brake lines with connecting piece - E -.
-
Assemble brake line.
-
Then brake system must be bled. Refer to => [ Brake System, Bleeding ] See: Brake Bleeding/Service and Repair/Brake System, Bleeding.
Make sure the brakes are working correctly before driving the vehicle for the first time.