A8L Quattro Sedan W12-6.0L (BSB) (2005)
Oil Filter Housing: Service and Repair
Oil Filter Housing
Oil Filter Housing
Special tools, testers and auxiliary items required
‹› Drip tray for workshop crane (VAS 6208) or drip tray (V.A.G 1306)
Removing
-
Drain coolant => [ Cooling System, Draining and Filling ] See: Cooling System/Service and Repair/Procedures.
-
Bring lock carrier into service position => [ Lock Carrier, Moving into Service Position ] See: Service and Repair/Lock Carrier, Moving into
Service Position.
-
Separate electrical connector - 1 - for mass air flow (MAF) sensor (G70).
-
Disconnect air duct hose - 4 - at intake manifold.
-
Unhook retainer for connections - 2 - and - 3 - at upper section of air filter housing.
-
Remove bolts - arrows -.
-
Remove upper section of right air filter housing.
-
Remove air duct - 1 -.