A8L Quattro Sedan W12-6.0L (BSB) (2005)
‹› Removing and installing => [ Oil Pump ] See: Oil Pump/Service and Repair
8
Chain tensioner
‹› Secure using drift (T40011) before removing
‹› Do not disassemble
‹› Removing and installing => [ Oil Pump ] See: Oil Pump/Service and Repair
9
Oil pan (upper section)
‹› Removing and installing => [ Oil Pan, Upper Section ] See: Oil Pan, Upper Section
10
Drive chain for oil pump
11
Chain sprocket for oil pump
‹› Component of crankshaft
12
Bolt
‹› Observe varying lengths
‹› Tightening sequence and torque specification => [ Position the upper section of the oil
pan and tighten all of the bolts in the sequence to
5 Nm. ] See: Oil Pan, Upper Section
13
45 Nm
14
Sealing plugs
15
M6 = 9 Nm; M8 = 20 Nm
16
Pulsation damper
17
Suction line
‹› Clean strainer if contaminated
18
9 Nm
19
9 Nm
20
Oil drain plug - 30 Nm
21
Seal
‹› Replace
Oil Level Thermal Sensor (G266)