A8L Quattro Sedan W12-6.0L (BSB) (2005)
NOTE: Moisten O-ring seals slightly with refrigerant oil before fitting.
-
Insert the two refrigerant pipes -B- and -C- in accumulator such that they are not strained. In doing so, pay attention to correct assignment of
connections.
-
Insert bolts -D- and tighten to 10 Nm.
-
Use bolt -A- (tightening torque 10 Nm) to attach refrigerant pipe to accumulator.
-
Re-install remaining components removed.
-
Evacuate and re-charge refrigerant circuit.