A8L Quattro Sedan W12-6.0L (BSB) (2005)
^
For fuel tank lock switch
11. Vent pipe
^
To evaporative emissions (EVAP) canister in spare wheel well on vehicle floor
^
Remains on fuel tank when fuel tank is removed
12. Fuel tank
13. Bushing
14. Bracket
^
For fuel tank
15. 22 Nm
16. Rubber buffer
17. Washer
18. 22 Nm
19. 22 Nm
20. Securing strap
^
With spacer, installed location
21. Retaining clip
^
For heat shield
22. Heat shield
23. Retaining clip
^
For heat shield
Installed location of spacer
-
Make sure that the spacer of the securing strap is seated directly below the seam of the fuel tank - arrow -.
Installation position of Ground (GND) connection
-
Route Ground (GND) connection as shown in illustration.
-
Make sure the Ground (GND) connector connection seats securely at metal ring of fuel filler tube - arrow -.
CAUTION: After installation, use an ohmmeter to check the electrical connection between the metal ring on the fuel filler neck and a bare metal part
on the body:
^
Specification: approximately 0 ohms.