A8L Quattro Sedan W12-6.0L (BSB) (2005)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor 3, Left Tubular Sensor
Fuel Level Sensor 3, Left Tubular Sensor
Special tools, testers and auxiliary items required
‹› Wrench (T10202)
Removing
Observe safety precautions. Refer to => [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Safety Precautions/Fuel Supply System.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Clean Working Conditions/Fuel Supply System.
‹› To remove the tubular sensor, the left chamber of the fuel tank may only be filled to a maximum of 1/3. Procedure to empty the fuel
tank. Refer to => [ Fuel Tank, Draining ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair/Procedures.
Observe measures when connecting battery.
-
With ignition switched off, disconnect Battery Ground (GND) cable - arrow -.
-
Open fuel filler flap briefly and then close again.
-
Remove the luggage compartment floor mat.