A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Remove quick-release screws - 1 - and - 2 - and remove front noise insulation.
-
Remove the lamp socket - 1 - from the side marker lamp housing.
-
Remove bulb from socket.
Installing
Install in reverse order of removal, observing the following:
-
Insert the new bulb (12V, 5 W - orange) into the housing without touching the glass bulb with bare hands.
-
When inserting, make sure markings - 2 - and - 3 - are horizontal.