A8L Quattro Sedan W12-6.0L (BSB) (2005)
Alignment: Procedures
Front Toe Constant S, Adjusting
Front Toe Constant S, Adjusting
-
Loosen the nut - A -.
-
Remove the bolt - B - approximately 4 mm.
-
Push the tie rod joint downwards onto the stop.
Specified values for wheel alignment. Refer to => [ Wheel Alignment Specifications ] See: Specifications.
-
Install the bolt - B - until the specified value is reached exactly.
-
Tighten the nut - A -. Refer to - item 9 - in => [ Power Steering Gear Assembly Overview ] See: Steering and Suspension/Steering/Steering
Gear/Service and Repair/Removal and Replacement/Power Steering Gear Assembly Overview, and check the value.
-
Tighten the bolt - B -. Refer to - item 7 - in => [ Power Steering Gear Assembly Overview ] See: Steering and Suspension/Steering/Steering
Gear/Service and Repair/Removal and Replacement/Power Steering Gear Assembly Overview.
-
Raise the vehicle slightly with the axle lift, the wheels must not loose contact with turn tables.
-
Remove the securing pins from the cylinders and install the threaded spindles in the cylinder.
-
Lower the vehicle onto the (VAG 1925/1) with the axle lift.
-
Vehicle is in starting position.