A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-1560008.png)
‹› Only the indicated bolts - 1 through 11 - may be loosened.
‹› If other bolts are loosened, this may affect the function of the mechatronics unit or it may come apart.
-
Remove mechatronics unit together with wiring harness from transmission, at the same time guiding out connector for wiring harness.
Installing
-
Make sure that seal - B - is properly installed and secured.
-
Replace wiring harness connector O-rings and lightly coat with ATF.
-
Clip wiring harness - A - onto mechatronics unit - B -. At the same time, insert tab - arrow - on backside of wiring harness into mechatronics unit.
