A8L Quattro Sedan W12-6.0L (BSB) (2005)
7
10 Nm
8
Engine oil cooler
‹› Integrated into oil filter housing
‹› With by-pass valve
‹› Removing and installing => [ Engine Oil Cooler ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Cooler/Service and
Repair/Engine Oil Cooler
‹› Renew coolant after replacing
9
10 Nm
10
Seals
‹› Replace
11
Oil Filter Bracket
‹› With filter by-pass valve
‹› Removing and installing => [ Oil Filter Housing ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Filter Housing/Service
and Repair/Oil Filter Housing
12
Seal
‹› Replace
13
O-ring
‹› Replace
14
O-ring
‹› Replace
15
Front oil pipe
‹› Removing and installing => [ Front Oil Pipe ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Line/Service and Repair
16
10 Nm
17
Oil Pressure Switch (F1) 1.4 bar
‹› Tighten to 25 Nm.
‹› Black insulation
‹› Checking, removing and installing => [ Oil Pressure and Oil Pressure Switch, Checking ] See: Engine, Cooling and Exhaust/Engine/Engine
Lubrication/Engine Oil Pressure/Testing and Inspection
18
Seal
‹› Replace
19
Alignment bushing
‹› 2 pieces
20
22 Nm
21
Oil filter element