A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Remove transmission tunnel cross member from body - arrows -.
-
Lower or raise transmission accordingly using Engine/Transmission Jack (V.A.G 1383 A) until transmission is horizontal in installation position
again.
‹› The transmission must be level to check the axle oil.
‹› It must be raised or lowered accordingly using Engine/Transmission Jack (V.A.G 1383 A) after removing the tunnel cross member.
-
Slide tunnel cross member as far back as possible so that transfer case oil inspection and filler plug - arrow - is accessible.