A8L Quattro Sedan W12-6.0L (BSB) (2005)
Front Final Drive Fluid: Service and Repair
Transfer Case, Transmissions With Separate Oil Systems, Filling After Repair
Transfer Case, Transmissions with Separate Oil Systems, Filling after Repair
Special tools, testers and auxiliary items required
‹› Used Oil Collecting and Extracting Device (V.A.G 1782)
‹› Transmission Fluid Hand Pump (VAS 6617)
‹› Protective eyewear
Conditions
‹› Axle oil temperature approximately 20 °C (68 °F) (room temperature) to max. 50 °C (122 °F).
‹› Vehicle level.
‹› The vehicle may not be started or towed without axle oil in it.
The transmission must be filled after the following work or repairs:
‹› The transfer case cover was removed and the gear oil was completely drained.
Refer to => [ Separate or Combined Oil Systems, Differentiation ] See: Separate or Combined Oil Systems, Differentiation
Procedure
‹› Follow all applicable disposal regulations.
‹› Automatic transmission clean working conditions, refer to => [ Clean Working Conditions ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service Precautions/Clean Working Conditions.
‹› General repair instructions, refer to => [ General Repair Information ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service Precautions/General Repair Information.
-
Remove rear noise insulation by loosening bolts - 2 -, - 3 - and - 4 -.