A8L Quattro Sedan W12-6.0L (BSB) (2005)
Canister Purge Control Valve: Service and Repair
Evaporative Emission (EVAP) Canister Purge Solenoid Valve N115, removing and installing
Removing
-
Switch ignition off.
-
Remove left rear wheel.
-
Remove left rear wheel housing liner.
-
Disconnect hose connections - 1 -, - 3 - and - 4 -.
-
Disconnect electrical harness connector - 2 - from Evaporative Emission (EVAP) Canister Purge Solenoid Valve N115.
-
Pull vacuum hoses - 3 - and - 4 - from Evaporative Emission (EVAP) Canister Purge Solenoid Valve N115 - Item. 2 -.
-
Pull solenoid valve out of mounting - 1 -.
Installing
Installation is in reverse order of removal, note the following:
Note: Secure all hose connections using hose clamps appropriate for the model type.
Install left rear wheel housing liner.
Torque specifications