A8L Quattro Sedan W12-6.0L (BSB) (2005)
Fuel Gauge Sender: Component Locations
Fuel tank with attachments, component overview
1. Securing strap
^
With spacer, installed location
2. 22 Nm
3. Fuel supply line
^
From fuel filter
^
To fuel rail
^
To disconnect, press release tab on connection piece
4. Fuel return line
^
From engine
^
To disconnect, press release tab on connection piece
^
Clip in on fuel tank
5. Vent pipe
6. Ground connection
^
To eliminate electrostatic charge
^
Installed position / check requirements
^
Make sure the connector is seated securely.
^
After installation, use an ohmmeter to check the electrical connection of the fuel filler tube on a bare metal part on the body. Specification:
approximately 0 ohms
7. Cap
8. Oil seal
^
Replace if damaged
9. 22 Nm
10. Electrical harness connector