A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-2909002.png)
the hands for any reason. The control module and Mechatronic could be destroyed by static discharge.
‹› No measuring instruments should be connected to the 16-pin connector of the wiring harness from transmission housing to
Mechatronic.
-
Touch vehicle Ground (GND) with your hand (without gloves) to discharge static.
-
Disconnect electrical harness connector on transmission, to do this turn plug counterclockwise - arrow -.
-
Connector multimeter for voltage measurement to vehicle wiring harness 16-pin connector as follows:
‹› Specification: approx. battery voltage
-
Connect multimeter for voltage measurement as follows:
