A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-558003.png)
-
Heat threads of connector-side shear bolts as shown in illustration for approx. 25 to 30 seconds.
CAUTION!
By heating the threads, the retaining tabs, shear bolts and parts of the metal housing become very hot. Do not burn yourself on these
parts! Make sure that only the threads are heated as much as possible, and not any of the surrounding parts. If necessary, cover these
parts.
-
Remove shear bolts with locking pliers (see direction of arrow).
‹› Both shear bolts that are screwed into the ECM do not require heating to be removed. They can be removed without heat.
-
Disconnect metal retainers from the ECM connectors.
