A8L Quattro Sedan W12-6.0L (BSB) (2005)
Windshield Washer Control Module: Service and Repair
Windshield Wiper Motor with Wiper Motor Control Module
Procedure
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Remove the windshield wiper motor. Refer to=> [ Windshield Wiper Motor ] See: Wiper and Washer Systems/Wiper Motor/Service and
Repair/Windshield Wiper Motor With Windshield Wiper Motor Control Module.
-
Remove nut - 2 - and detach crank from wiper motor.
-
Remove wiper motor from wiper frame - arrows -.
-
Secure the new wiper motor without the crank on the wiper frame - arrows -.
-
Connect electrical connector.