audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Right Rear Heated Oxygen Sensor before Catalytic Converter|Page 3487 > < Right Rear Heated Oxygen Sensor before Catalytic Converter
Page 2
background image

Installing

Perform installation in the reverse order of removal, noting the following:

‹› New oxygen sensors are coated with assembly paste; the paste must not get into slots on the oxygen sensor body.

‹› When re-installing a used oxygen sensor, coat the threads with hot bolt paste. This paste must not come into contact with slots on the oxygen

sensor body.

‹› During installation, all cable ties must be re-installed at the same location.

‹› Wires of oxygen sensors must always be secured in the same position when installing so that contact with the exhaust pipe is avoided.

-

Install engine.

Right Rear Heated Oxygen Sensor before Catalytic Converter|Page 3487 > < Right Rear Heated Oxygen Sensor before Catalytic Converter