A8L Quattro Sedan W12-6.0L (BSB) (2005)
Ignition Switch: Service and Repair
Access/Start Authorization Button E408 or Driver Identification Control Module J589, Removing and
Installing
Access/Start Authorization Button E408 Or Driver Identification Control Module J589, Removing And Installing
Removing
-
If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine .
-
Switch off ignition and remove ignition key.
-
Remove front ashtray insert - 1 - and press button - arrow - .
-
Remove bolt - arrow - and detach front ashtray housing.
-
Unplug connector.
-
Lift off center console switch trim - arrows - .
-
Unplug connectors.