A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Install the body acceleration sensor so the locking device - arrow A - engages in the brace in the body - arrow B -.
-
Tighten the bolt - arrow - for the body acceleration sensor - 4 -. Refer to - item 3 - in => [ Mounting Bracket, Upper Control Arms and Air Spring
Damper Assembly Overview ] See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Air Spring/Service and
Repair/Removal and Replacement/Front Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview.
-
Install the connector - 2 - to the bracket - 3 -.
-
Connect the electrical connector - 1 -.
-
Check the body acceleration signal. Refer to => [ Body Acceleration Sensor, Checking Acceleration Signal ] See: Steering and
Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Testing and Inspection/Component Tests and General Diagnostics.