audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Driver-Side Electronics Box, Removing and Installing|Page 11131 > < How to Find Wiring Diagrams|Page 11126
Page 1
background image

Electrical Accessory Panel: Service and Repair
Driver-Side Electronics Box, Removing and Installing

Driver-side Electronics Box, Removing And Installing

-

Component location: On floor of vehicle beneath drivers seat

Removing

-

Remove drivers seat

-

Switch off ignition and remove ignition key.

-

Remove lower A-pillar trim.

-

Fold back floor carpet.

-

Release cover for drivers side electronics box - arrows - and fold to side.

-

Remove control modules - 1 - out of drivers side electronics box - 2 - .

-

Take out electronics box.

NOTE: Check exact assignment for driver side electronics box in current wiring diagram .

Installing

Install in reverse order of removal, observing the following:

-

Install lower A-pillar trim.

-

Install drivers seat

Driver-Side Electronics Box, Removing and Installing|Page 11131 > < How to Find Wiring Diagrams|Page 11126