A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Subtract 60 cm from the total length of antenna wire measured, to receive the length of connecting wire required.
-
Obtain the correct length of the required adapter wires and connecting wires as an original replacement part.
-
Cut the connectors off of the faulty antenna wiring.
‹› Leave the rest of the defective antenna wire in the vehicle.
-
Connect the adapter wires to the devices in the vehicle.
-
Provide harness connectors with piece of foam hose to avoid rattle.
-
Route and secure connecting wire parallel to old antenna wire.
‹› Antenna wires must not be kinked or excessively bent! The bending radius must never be below 50 mm.
-
Connect the connecting wire with the adapter leads.
-
To avoid rattle, slide a suitable piece of foam hose onto antenna connector.
-
Perform a function test.