A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Loosen the quick release fasteners - 1 - and remove the front noise insulation.
‹› Press the locking pins on the wheel housing liners only about 5 mm into the expanding clip and not all the way through.
‹› This releases the locking pin so it can be removed.
‹› When installing, slide the locking pin back and the expanding clip can be used again.
-
Press the locking pins on the expanding clips - 1 - on the front wheel housing liner about 5 mm deep into the expanding clip using a screwdriver.
-
Remove the expanding clip.
-
Remove the bolt - 2 - from the wheel housing liner.
-
Remove both bolts - arrows - from the front wheel housing liner.