A8L Quattro Sedan W12-6.0L (BSB) (2005)
This tightening specification applies only in conjunction with interchangeable head (T40037).
6
Bolt, 95 Nm
‹› Tightening sequence, refer to => [ Tightening Sequence ] See: Power Steering Gear.
7
Bolt, 5 Nm
8
Bolt
9
Self Locking Nut, 50 Nm
‹› Always replace after removal.
10
Wheel Bearing Housing
11
Return Hose
‹› Different versions
‹› Note the engine.
12
Pressure Line
‹› Different versions
‹› Note the engine.
13
Banjo Bolt, 35 Nm
14
Seal
‹› Always replace.
15
Seal
‹› Always replace.
16
Locking Bolt, 22 Nm
17
Seal
‹› Always replace.
18
Seal
‹› Always replace.
19
Banjo Bolt, 47 Nm
20
Tie Rod
‹› Removing and installing, refer to => [ Tie Rod ] See: Tie Rod/Service and Repair/Removal and Replacement/Tie Rod.
21
Tie Rod End
‹› Removing and installing, refer to => [ Tie Rod Ball Joint ] See: Tie Rod/Service and Repair/Removal and Replacement/Tie Rod Ball Joint.