A8L Quattro Sedan W12-6.0L (BSB) (2005)
Control Arm Bushing: Service and Repair
Track Control Arm Bushing
Track Control Arm Bushing
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 402)
‹› Thrust disc (VW 412)
‹› Tube 42 mm diameter (VW 516)
‹› Tube (3296)
‹› Assembly paste (G 052 109 A2)
Wheel Bearing Housing Side
‹› Hold the track control arm firmly in position while pressing the bushing out and in.
Removing
-
Remove the track control arm. Refer to => [ Track Control Arm ] See: Service and Repair/Track Control Arm.
-
Mark the installed depth - arrow - on the bushing - 1 -.
Use a waterproof felt tip pen for applying the mark.
-
Install the special tools as shown in the illustration.
-
Press the bushing - 1 - out of the track control arm - 2 -.
Installing
-
Transfer the installed depth mark from the old bushing to the new one.