A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Remove the air spring damper on the track control arm and tilt it back (control position). Refer to => [ Wheel Bearing Housing, Raising to Control
Position to Tighten Bolts ] See: Rear Knuckle/Service and Repair/Procedures.
-
Remove the exhaust system lines - 4 -.
-
Remove the rear portion of the exhaust system. Remove the bolts - 1 through 3 - and the exhaust system (a second technician is needed).
-
Remove the air duct bolts - arrows - on the rear final drive and remove the air duct, if equipped.