A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Remove the (T10149) and the (VAG 1383A).
Continuation for Both Sides
-
Follow the instructions for further assembly. Refer to => [ Working after Adjusting Control Position ] See: Rear Knuckle/Service and
Repair/Procedures.
-
Install the wheels and tighten.
-
Place the vehicle on its wheels. Refer to => [ Positioning Vehicle on the Hoist and on its Wheels ] See: Service and Repair/Procedures/Positioning
Vehicle on the Hoist and on its Wheels.
-
Perform a vehicle alignment. Refer to => [ Wheel Alignment ] See: Alignment/Service and Repair/Procedures/Wheel Alignment.