A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-4427007.png)
-
Install the subframe without tension.
-
To make it possible to align the subframe without tension, tighten the nut for the left and right front engine mount - arrow - after the alignment.
-
Install the spacers.
-
Only tighten the subframe bolts to the specification, do not tighten them further (only tighten the bolts after an alignment).
CAUTION!
If the vehicle will be driving on the streets, all bolts and nuts must be tightened properly!
-
Place the (VAG 1383A) with a wooden block under the subframe and press lightly against.
