A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-4435002.png)
-
Tighten the air line connection on the pressure reservoir - 1 - to 5 Nm.
-
Switch on the ignition.
-
Switch the "vehicle lift mode" off. Refer to => [ Vehicle Lift Mode ] See: Description and Operation/General Information, or the Owner's Manual.
-
Fill the system using the (VAS 5051A). Refer to => [ System Venting or Filling ] See: Description and Operation/Level Control System.
-
Install the heat shield on the left of the vehicle underbody below the pressure reservoir.
-
Install and adjust the exhaust system free of stress.
