A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-4436003.png)
‹› In this area, the original line must be used as a replacement because only the original line has the foam rubber protector. Also, the original line has
a very narrow radius in the area where it connects to the air spring damper. This narrow radius cannot be created on the air line from the repair set.
-
Secure the line connector - 3 - on the plug socket - 4 - using a new cable tie as shown in the illustration.
Right Front Air Spring Damper Separation Point in the Left Wheel Housing
1. Air line
2. Plug socket cable tie
3. Foam rubber, 10-15 mm long
4. Line connector
5. Cable tie, for the line connector to the wiring harness
-
Install the new air line - 1 - in the plug socket using a new cable tie - 2 -.
-
Secure the line connector - 4 - on the wiring harness using a cable tie - 5 - as shown in the illustration.
Separation Points Near the Solenoid Valve Block for the Air Lines Routed to the Back
‹› The illustration shows all three line connectors for the air lines routed through the interior.
-
Secure one, two or three air lines as needed to each other and on the existing air lines using cable ties - arrow B - as shown in the illustration.
-
Install the air lines in the line bracket - arrow A -.
