A8L Quattro Sedan W12-6.0L (BSB) (2005)
Fig. 2 Mounting tire
Do not use removing blades in valve area.
-
Position wheel electronics approx. 180 degrees opposite puller knob.
-
Press tire into the drop center rim approx. 90 degrees in front of puller knob (see arrow).
-
Mount tires.
Removing and installing front receiving antennas
The receiving antennas are located behind the wheel housing liners.
-
Ignition off.
-
Disconnect connector -1-.
-
Release clip -2
-
Remove antenna -3-.
Removing and installing front receiving antenna with bracket
-
Unscrew hex nut -1-: tightening torque 2 Nm
-
Remove aerial bracket -2-.
Install in reverse order.
Removing and installing rear receiving antennas
The receiving antennas are located behind the wheel housing liners.