audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Oil Pan, ATF Strainer and Mechatronic Unit Assembly Overview|Page 8592 > < Oil Pan, ATF Strainer and Mechatronic Unit Assembly Overview|Page 8590
Page 1
background image

Fluid Filter - A/T: Service and Repair
Oil Pan, ATF Strainer and Mechatronic Unit

Oil Pan, ATF Strainer and Mechatronic Unit

=> [ Oil Pan ] 

=> [ ATF Screen ] 

=> [ Mechatronics Unit ] 

=> [ Wiring Harness in Transmission ] 

CAUTION!
Do not run engine or tow vehicle with oil pan removed or when there is no ATF in the transmission.

‹› Always replace mechatronics unit if it is dirty or faulty.

‹› Rules of cleanliness for working on automatic transmissions => [ Clean Working Conditions ] See: Service Precautions/Clean Working Conditions

.

‹› General repair notes => [ General Repair Instructions ] See: Service and Repair/Procedures/09EA Transmission/General Repair Instructions.

‹› Coat O-rings and seals with ATF. Other lubricants cause malfunctions of the hydraulic transmission controls.

Oil Pan

‹› Rules of cleanliness for working on automatic transmissions => [ Clean Working Conditions ] See: Service Precautions/Clean Working Conditions

.

‹› General repair notes => [ General Repair Instructions ] See: Service and Repair/Procedures/09EA Transmission/General Repair Instructions.

Special tools, testers and auxiliary items required

‹› Old oil collecting and extracting device (V.A.G 1782)

‹› Safety glasses

Removing

-

Remove both rear noise insulation panels, by removing bolts -  2 -, - 3 - and - 4 -.

Oil Pan, ATF Strainer and Mechatronic Unit Assembly Overview|Page 8592 > < Oil Pan, ATF Strainer and Mechatronic Unit Assembly Overview|Page 8590